SV8 specification draft

Nota : All fields, unless explicitely specified otherwise are read and written in Big-Endian order, independently of the underlying architecture.

File magic number

Magic number is on 32bits and is equal to 'MPCK' or 0x4D50434B
New value so old decoders will happily skip such files.

Block formatting

All blocks are formated using Key / Length / Value.
Key is 16 bits long. It's the block ID.
Length is a variable size field using the same values as ​nut :

bits, big-endian
0xxx xxxx                                           - value 0 to  2^7-2
1xxx xxxx  0xxx xxxx                                - value 0 to 2^14-2
1xxx xxxx  1xxx xxxx  0xxx xxxx                     - value 0 to 2^21-2
1xxx xxxx  1xxx xxxx  1xxx xxxx  0xxx xxxx          - value 0 to 2^28-2
...

The length is the size of the block in bytes, including the key and size fields. So the minimum length of a block is 3 bytes.
The value is the block content. Its size can be 0.
All unused bits in a block MUST be 0.

Field	length (bits)	Value
Key	16	"EX"
Length	n*8; 0 < n < 10	0x1A
Value	Length * 8	"example"

Summary of reserved block keys

Block name	Key	Mandatory
Stream information	SI	yes
Replay gain	RG	yes
Encoder information	EI	no
Audio data	AD	yes
Seek Table	ST	no

Stream information block

This block key is "SI".
This block contains the informations needed to decode the stream. This block is mandatory and must be written before the first audio block.

Field	length (bits)	Value	comment
CRC	32		CRC 32 of the block (this field excluded). 0 = invalid
Version	8	0x08	bitstream version
Sample count	n*8; 0 < n < 10		number of samples in the stream. 0 = unknow
Sample Frequency	4		see table below
Channel count	4	1..16	number of channels in the stream
Max used bands	5	1..32	maximum number of bands used in the file
IS used	1		IntensityStereo. Klemm specification suggest to use the number of band always using IS ? From the source, this flag is always set to 0 and marked as not supported anymore. Even the decoder doesn't read it and set it to 0. This flag will be removed
MS used	1		MidSideStereo
PNS used	1		The decoder doesn't use this information -> move it to EI block ?
Audio block frames	4	0..15	number of frames in an audio block is : 2Value (1..32768)
Unused	4		must be 0

Frequency table

Value	Frequency (Hz)
0	44100
1	48000
2	37800
3	32000
4	96000

The CRC used in this block needs to be define.

Replay gain block

This block key is "RG".
This block contains replay gain datas. This block is mandatory and must be written before the first audio block.
Values stored in dB in Q8.8 format (maybe Q7.9 or relative to the max value for the bitdepth is better ?).

Field	length (bits)	Value	comment
Version	8		The replay gain version
Title gain	16		The loudness calculated for the title, and not the gain that the player must apply
Title peak	16
Album gain	16		The loudness calculated for the album
Album peak	16

Encoder infomations

This block key is "EI".

Field	length (bits)	Value	comment
profile used	4	0..15
unused	4
encoder version	32		MajorNumber.MinorNumber.Implementation.Build

Audio data block

This block key is "AD".
This block contains audio frames. The first frame is a key frame.

Field	length (bits)	Value	comment
audio frames	?		n (or less if last block) frames of audio data as defined in SI block

Seek Table Block

This block key is "ST".

Format have to be defined.

Security Block

Checksum (MD5, SHA1) or error correcting code (LDPC).
To be defined later. May be better to keep security features external only.

Tags

No block must be written after the last audio block to allow tagging by other applications.
Remarks about tagging? Incompatibilities?